WIP350/500-100/200℃

High pressure equipment with a floating end cover and a combination mechanism of bolt and thick wall working cylinder. The equipment is designed and manufactured in accordance with JB / t7348-2005 isostatic press. The equipment is mainly used in powder metallurgy industry, such as electronic ceramics, etc. It adopts wet bag dry forming method.
Warm isostatic press: it is mainly used for powder material to obtain solid billet under high temperature and pressure. Such as: electronic ceramics, graphite, polyamide rubber material molding, etc.

1: The pressing temperature is 0 ℃ ~ 85 ℃, the working medium is pure water, and the working pressure is 0 ~ 100MPa;
2: The pressing temperature is 0 ℃ ~ 200 ℃, the working medium is heat transfer oil, and the working pressure is 0 ~ 200MPa;

Main technical parameters:
★ effective inner diameter of working cylinder: φ 350mm
★ effective internal height of working cylinder: 500mm
★ maximum working pressure: 100MPa
★ maximum working temperature: 200 ℃
★ pressurization time (empty cylinder 0-100Mpa) ≤ 10min, intermediate pressurization pause point can be set arbitrarily
★ temperature rise (normal temperature ~ 200 ℃) ≤ 90 min intermediate insulation pause point can be set arbitrarily
★ secondary pressure relief: pressure relief speed and pressure relief conversion pressure can be manually adjusted
★ electrical control system: PLC controller + electronic text monitoring
★ driving system medium: air
★ pressure medium in the container: heat transfer oil
★ overall power: 25 kW

If the diameter, effective working height and working pressure of the working cylinder are different from those listed in the table, and the user needs to customize it, or if there are specific requirements for the working medium and control system, the company can design it according to the user's requirements.